|Hole Size||20 mm|
|Surface Treatment||Hot Dipped Galvanised|
|Mesh Size||30 per inch|
|Thickness (Millimetre)||6 mm|
|Roll Length (Meter)||15 m|
- We are leading manufacturer of reinforcing mesh, as well as a supplier of concrete reinforcing wire products. The reinforcing is recognized in the concrete reinforcement market with a reputation for quality products, as well as for a highly professional and superior service.
- Reinforcing welded mesh is the high tensile wires welded into a rectangular/square mesh grid fabric. It is used on reinforced concrete construction, floor slabs reinforcement, brick wall reinforcement and floor warming. Reinforced steel bar for concrete reinforcement is also called ribbed steel bar. It usually has vertical rib and transverse rib on surface.
- Our reinforced steel bar with diameter ranging from 6mm - 12mm and spacing from 100mm to 300mm can be done. This deformed steel bar is widely used for all kinds of building structure, especially heavy-duty and high building structure.
The following British and Indian standards have been published for regulating steel wires and the manufacture of WWM.
||Specification for the hard drawn steel wire fabric for concrete reinforcement.
||Specification for cold reduced mild steel wire for the reinforcement of concrete.
||Specification for welded steel fabric for the reinforcement of concrete.
BS 4482:1998 and 4483:1998 stipulate the minimum requirement for characteristic yield strength of welded fabric.
||Min.Characteristics Strength N/mm2
Pressure combined with heat fuses the parent material to form the weld and can withstand shear strength of 240 Mpa and confirms to ASTM (American Society for Testing Materials) standards. It resist higher shear load since no foreign material is used in the welding process. The Bars conform to IS:
432-Pt 11/1982 which specifies UTS of 570 N/mm2 and Characteristic Strength of 480 N/mm2. WWM is manufactured conforming to IS:
1566-1982 with long and cross wires spacing ranging from 50 to 400 mm.